Syllabus / Part V — Applications & Modeling
Module 13
Applications: Control Systems
Feedback, transfer functions, PID, stability analysis, frequency response and state-space control — everything an autopilot needs.
Builds on: Module 6 — Laplace Transforms, Module 5 — Second-Order Linear ODEs & Oscillations, Module 7 — Systems of ODEs & Dynamical Systems
Open vs closed loop, block diagram algebra, disturbance rejection, sensitivity, and the cruise-control example.
🌊 An autopilot is a feedback loop wrapped around the flight dynamics.
First- and second-order system responses, rise time, overshoot, settling time, steady-state error, dominant poles.
🌊 Specifying how crisply an aircraft responds to pilot input.
Proportional, integral and derivative action; tuning (Ziegler–Nichols, manual); integrator windup; discrete-time PID.
🌊 Drones and altitude-hold autopilots run PID loops.
BIBO stability, Routh–Hurwitz criterion, root-locus sketching rules, and designing gains by moving poles.
🌊 Choosing autopilot gains to damp the phugoid.
Sinusoidal steady state, Bode magnitude and phase plots, gain and phase margins, Nyquist criterion (intro).
🌊 Pilot-induced oscillation is a phase-margin problem.
State-space models, controllability, full-state feedback u = −Kx, pole placement, and observability.
🌊 Modern flight control is designed in state space.
Optimal control with LQR, Riccati equations, Luenberger observers and an introduction to the Kalman filter.
🌊 LQR autopilots and Kalman-filtered sensors are standard in UAVs.